|
Cleartech offers the Lowest Price Guaranteed on
all paint protection kits.
If a competitor lists an identical item (or very similar) at a lower delivered price, including
shipping and taxes (if applicable), please ask for the "Low
Price Guarantee" and include a detailed description
with any information we can use to verify the
competitors price and product.
In order to qualify for our Low Price Guarantee, the
competitor must sell a new, non-auction, in-stock item
identical to our product. The Low Price Guarantee is
only available at the time of purchase. Our Low Price Guarantee only applies to pre-sold kits. It does not apply to orders that include local installation costs.
Cleartech reserves the right to refuse any order or
price matching if these terms are not met.
How is my purchase shipped?
All of our domestic orders will be shipped by UPS. Smaller, lighter weight orders will be shipped via Priority USPS Mail. Pre-Cut Kits will be rolled together and placed in a triangle box to protect against damage during shipping.
Cleartech does not ship Internationally unless pre-approved.
Can my clear bra be removed?
Yes. It can be removed easily and will not damage the
paint. To remove the film, you must heat the surface to
approximately 150°F while working a corner of the film
with your fingernail. Once you have enough of the
material free from the surface to hold on to, slowly
pull the film from the paint.
How hard is it to see on the
car after it is applied?
The material is about 95% clear. On any color darker
than stark white, you can't see the film. On a stark
white car, you can see that .5% of color, but it still
is "invisible" at a short distance.
Will my paint fade differently
under the bra than the rest of the car?
No. The material does contain an inhibitor to prevent
the plastic from reacting to the sun's UV rays, but this
does not prevent the UV rays from passing through the
plastic into your paint.
My Headlight Kits have fogged
up & is not going away?
When using the wet application technique, this is
normal. The fog is the result of the alcohol/water
solution evaporating under the plastic. The water vapor
that is produced results in a hazy appearance for
several days. The haze will clear as the water vapor
dissipates. This process could take as much as 2 months,
depending on where the vehicle is kept and what season
you are in. Just be patient, if installed
properly, the fog will fade.
I don' t think the kit is cut
right. It seems to be too short.
Depending on the kit you are applying, some kits are
purposely designed short so that you have to stretch
them into place. The purpose of this design is to
compensate for an unusual curve on the vehicles surface
or to help pull out excess material around the edges
that would otherwise be very difficult to lay down.
|
